I'm have troubles using USB Smart Card Readers. Some work others don't.
- ESXi 5.0
- View 5.0
- Dell FX100 (Zero Client, lastest firmware from teradici: 4.0.2, Tera1 Chipset)
- VM: Windows 7 SP1 32 bit
- Protocol: PCoIP
The option in the View Agent 'PCoIP Server / PCoIP SmartCard' is actived.
Smartcard Readers:
- Cherry ST-1044U (works)
- GemPlus (works)
- ACR30U (doesn't work)
- ACR38T (doesn't work)
We really need the ACR38T because this one is a SIM card reader, we can put the SIM card in without any adaptors.
With the Zero Clients:
What I've noticed is that when I use a SmartCard Reader that works (Cherry / GemPlus), it isn't listed in the Device Manager of Windows. And when I plug in one that doesn't work (ACR), Windows shows it in the Device Manager as a SmartCard Reader. It is listed as the correct SmartCard Reader, name & drivers are correct. But non of the software that has to read the smartcard can find a SmartCard Reader
With a Windows Client:
I've did some other test using a Windows 7 client, with the VMware View for windows on it. And from the moment I plug in a SmartCard Reader that also works with the Zero Client, the device is not listed under the 'Connect USB Device'-menu of the VMware View Client and the redirection works as it should be.
From the moment I plug in a SmartCard Reader that didn't work with the Zero Client, like the ACR's, the device is listed under the 'Connect USB Device'-menu of the VMware View Client. When I tick that one on, the redirection occurs just like the zero client. The device is visible under the Device Manager of the VM, and non of the software is able to work or even see it. When I tick the device off in the 'Connect USB Device'-menu of the VMware View Client. The device also disappears from the Device Manager of the VM and the application on the VM are able to work with de SmartCard Reader.
Conclusion:
It seems that VMware does not handle all SmartCard Readers equally, but why? And how can I make the ACR-devices to work.
Extra Steps I've took:
- I experimented already with the USB device filters. When I add the VID & PID of the ACR SmartCard Reader to the 'HardwareIDFilters', the device is blocked, as expected, and not usable or visible in the VM.
- I also hadn't any luck when adding the device to the 'AllowHardwareIDs'.
- Change the settings of the Zero Client (after every setting, I restarted the VM and the Zero Client):
- ECHI on or off
- Add the SmartCard Reader as bridged device
Like I said before, it's just like VMware forward the ACR SmartCard Readers like an normal USB device and the Cherry/GemPlus SmartCard Reader like a device with which you can authenticate with.
I really do not need the SmartCard Authentication of VMware View.
Any idea's?
Thanks in advance.